Home Page

Zebra Printer Setup Utility 2.4.4335 - Google Play




About Zebra Printer Setup Utility

With Zebra’s Printer Setup Utility, configuring your Print DNA printers to optimize performance is easy – no specialized knowledge required. To use, tap the printer you wish to configure. Your printer and device will i

With Zebra’s Printer Setup Utility, configuring your Print DNA printers to optimize performance is easy – no specialized knowledge required.


To use, tap the printer you wish to configure. Your printer and device will instantly begin communicating via Bluetooth. Then follow the simple setup wizards that walk you through how to set specific printing parameters – such as calibration, media type, ribbon, printer language and print quality – to optimize performance. If your Android device does not support Tap and Pair via NFC, the app can discover your printer via Bluetooth and network, or connect to it via USB.

With the Security Assessment Wizard feature, assess your Zebra printer security posture, compare your settings against security best practices and make changes based on your conditions to increase protection.

Bluetooth Printers are now manageable, even in the field!
Normally, Bluetooth printers are not easily managed – particularly when they are used in the field by a mobile workforce. Zebra’s Printer Setup Utility makes Bluetooth printers manageable via the Cloud by allowing the app to retrieve files from your Cloud storage provider and then transfer these files to the printers for configuration and printer OS updates. This simplifies the management of Bluetooth printers, dramatically improving both printer ROI and the productivity of a mobile workforce.

Help is just a tap away - use the "Zebra Assist" feature to send your printer's configuration directly to Zebra's support team.

SUPPORTED PRINTERS:
The app supports Zebra printer models running Link-OS 5.0 and later and ZQ200 series, ZQ112, ZQ120, ZR118, ZR138 printer models that run the CPCL (Line Print) and ESC/POS command languages.
IMPORTANT: The ZQ200 series, ZQ112, ZQ120, ZR118, ZR138 printers require firmware version 88.01.04 or later to work with this version of the app. See this support article for instructions on where to get the firmware and how to upgrade your printer.

The app supports Bluetooth Classic, network and USB On-The-Go connectivity.

NOTE: Tap/Pair and USB On-The-Go can only be used on those Android devices that support NFC (for Tap/Pair) and USB OTG.



Previous Versions

Here you can find the changelog of Zebra Printer Setup Utility since it was posted on our website on 2016-11-05 14:51:15. The latest version is 2.4.4335 and it was updated on 2024-03-25 21:22:47. See below the changes in each version.

Zebra Printer Setup Utility version 2.4.4335
Updated At: 2023-12-08
Changes: Internal updates related to crash analytics reporting. Corrected some links to zebra.com web pages. Minimum API level is now 29.
Zebra Printer Setup Utility version 2.4.4273
Updated At: 2023-09-08
Changes: 1. Added support for configuring WPA3 in printers that support Wi-Fi 6. 2. Added support for setting the Wi-Fi Country Code. 3. Added warning text on screens where settings can be saved to a file. 4. Corrected an issue where printers on a different subnet weren't found when using the “Manually Select Printer” option. 5. Bluetooth pairing improvements.
Zebra Printer Setup Utility version 2.3.4212
Updated At: 2022-11-10
Changes: 1. Added support for ZT111, ZT211 and ZD888 printers. 2. Added support for setting FIPS 140-2. 3. Added support for configuring WEBLINK and MQTT settings in the printer. 4. Added Asset Tag, Traffic Ticket and Photo Badge demos. 5. Added the ability to print label templates. 6. Virtual Device term has been changed to Emulation. 7. Command Language and Emulation can be set independently on the Device Language screen. 8. It's now necessary to re-connect manually to a printer after restarting it.
Zebra Printer Setup Utility version 2.2.3792
Updated At: 2020-10-06
Changes: - Added support for Bluetooth LE. - Added a Darkness Control option in the Print Quality wizard for printers that support it. - Added a dialog to warn about limited pairing mode that applies to printers running Link-OS 6 and later. - Improved detection and warning when connecting to unsupported printers. - Minimum Android version is now 5.1 - Minor bug fixes to improve app stability. - Added app navigation analytics.
Zebra Printer Setup Utility version 2.2.3441
Updated At: 2020-05-09
Changes: - Added reduced feature support for the ZQ200 series, ZQ112, ZQ120, ZR118, ZR138 printers that run the CPCL (Line Print) and ESC/POS command languages (see important firmware related note in the description section). - Improved re-connection of the mobile computer and printer in scenarios where the printer restarts. - Corrected an issue where combinations of certain mobile computer regional settings and keyboard styles prevented entering a decimal point in the media settings wizard.
Zebra Printer Setup Utility version 2.1.2682
Updated At: 2019-09-29
Changes: Added the Printer Security Assessment Wizard feature. The user interface has been updated to align with Link-OS printer optional color touch displays. Removed support for Bluetooth LE.
Zebra Printer Setup Utility version 1.2.2018 (6e1459cabd33d5f3eaaafc74e631182278946289)
Updated At: 2019-03-21
Changes: Added a link to the Zebra Technologies privacy policy on the about dialog.
Zebra Printer Setup Utility version 1.1.1454
Updated At: 2016-04-05
Changes: Bluetooth Low Energy (BTLE) is now supported.,NOTE: Data transfer speeds using BTLE have been bench marked at 80 bytes per second, when used in an isolation chamber. Given this, BTLE is best used for discovering devices and light-duty data transfer events. The app will notify the user when it determines that a file transfer may take a longer time period via BTLE.,ZD400 series printers will need to be updated to the V77.19.16Z firmware to use BTLE


Related Apps

Here you can find apps that are similar with Zebra Printer Setup Utility.



Disclaimer

Official Google Play Link


We do not host Zebra Printer Setup Utility on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Google and passed their terms and conditions to be listed there. We recommend caution when installing it.

The Google Play link for Zebra Printer Setup Utility is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.

If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.

BarCode2D-PNG


Click stars to rate this APP!

Users Rating:  
  0.0/5     0
Downloads: 69
Updated At: 2024-03-25 21:22:47
Publisher: Zebra Technologies
Operating System: Android
License Type: Free